Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Boulder
Garage door installation in Boulder, CO typically runs $700-$2,200 depending on door width, material, and wind-rating requirements, and most standard installations are completed in a single day. We’re Servo Garage Doors Longmont, and we’ve been installing and repairing garage doors in Boulder since 2015, including on the wind-battered west-facing slopes of Table Mesa and Shanahan Ridge that see the worst Chinook loading in the Front Range. When you call (970) 528-5851, you get a live person, a written price before any work starts, and a documented photo record when the technician leaves.
Why Servo Garage Doors Longmont Is Boulder’s Preferred Garage Door Installation Company
Boulder homeowners tend to do their homework before calling anyone. They read the three-star reviews, they want the price range in writing, and they’ve usually already researched wind ratings and torsion spring life expectancy. That’s exactly the customer we built Servo for.
Every installation in Boulder starts with Clause 1 of The Haven Standard: a flat, written price and a written scope, delivered before any tool comes off the truck. That’s not a sales tactic. It’s the founding rule Marcus Deller put in place when he started Servo, and it applies to every job, no exceptions. If you bring us a written estimate from another Boulder garage door company, we’ll give you a free second opinion on it, too. Bring the paperwork.
Our technicians are background-checked and uniformed, and they carry the license and insurance documentation with them. You see the failed part before you’re quoted a replacement. Clause 4 of The Haven Standard is why: the customer sees the evidence first. Every visit ends with a photo record showing what was found and what was done. No other garage door company in Boulder works this way.
Our Garage Door Installation Services in Boulder
New Door Installation
A standard new door installation in Boulder runs $700-$2,200, and the spread is almost always determined by wind-rating requirements. If your garage faces west toward the Flatirons, you need more than a standard 16×7 steel door. You need reinforcement struts, heavier-gauge track, and panels rated for the gust loading that hits Table Mesa and Shanahan Ridge during Chinook events. Our Garage Door Installation team specs doors for the actual load your street sees, not a generic Front Range average.
Single Car Door
Many Boulder homes in Martin Acres and Baseline still have the original 1950s-1980s single-car openings, often narrower than today’s standard 9-foot width. We install single doors in 8×7, 9×7, and custom widths, and we’ll tell you plainly whether your existing header can handle the new door’s weight before we quote anything. If the opening is undersized, we’ll explain what a header modification involves and why it’s worth doing once, correctly.
Double Car Door
Double doors on Boulder ranches take the most wind abuse of any garage door type. The wider the span, the more surface area there is for a 100+ mph gust to press against. The failure we see most often in Boulder is not the opener or the spring. It’s the panels themselves buckling inward mid-storm. Wind-rated bracing and struts are not an upsell here. They’re the difference between a door that holds through the winter and one that has to be replaced after the first downslope event. The price range for a new door installation covers both standard and wind-rated configurations.
Custom Garage Door
Here’s what most national installers won’t tell you about Boulder. The city’s growth-control policies preserved a huge stock of mid-century homes with non-standard garage openings. A 1963 Martin Acres ranch often has a garage ceiling too low for standard high-lift track, or an opening that’s 7 feet high instead of 7.5. We size custom doors to those conditions: Amarr and Clopay both make wind-rated custom sections that can be cut to width, reinforced with horizontal struts, and paired with high-cycle torsion springs rated for the temperature swings Boulder sees, including the 40-50°F swings that come with Chinook events. The custom path is slower than ordering an off-the-shelf size, and it’s often the only option that doesn’t require reframing the opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Boulder
We install and service Chamberlain, Genie, Clopay, and Amarr garage doors and openers, and we carry common Boulder stock on the truck, including torsion springs, rollers, hinges, and weather seal. That means a new installation or a spring replacement on a 1980s Genie opener in Baseline doesn’t have to wait for a part to be shipped from Denver. Dispatch and scheduling are coordinated from our Denver metro office, and local crews serve Boulder daily. When you see a door brand we don’t list, ask. We source parts for all four brands weekly and can usually have what Boulder needs within a day or two.
Common Garage Door Installation Problems We See in Boulder Homes
Boulder’s climate does specific, predictable things to garage doors. Here’s what we find most often when we’re called out for an installation or a door that won’t work right.
- Undersized or fatigued torsion springs. Boulder’s 40-50°F Chinook temperature swings fatigue torsion springs faster than the same springs in Denver or Louisville. A spring that should last 10,000 cycles can fail in half that time here. When it snaps, the opener tries to lift a dead-weight door, strips its gear, and tears the cable. We replace it with a high-cycle spring rated for Boulder’s actual temperature range.
- Inward panel buckling on west-facing doors. On Table Mesa and Shanahan Ridge, doors that face the Flatirons sit directly in the path of downslope wind. Standard panels without wind-rated reinforcement flex past their design limit, buckle inward, and pull the track out of alignment. After a major wind event, call volume spikes on precisely those slopes.
- Rusted or seized rollers and track in uninsulated garages. Older Boulder garages usually aren’t heated or sealed, and freeze-thaw cycles put condensation on metal surfaces. Nylon rollers degrade faster at altitude, and rust builds on track surfaces. A door that jerks or grinds mid-travel is usually riding on rollers or track that should have been replaced years ago.
- Undersized openings in 1950s-1980s homes. The ranches in Martin Acres and Baseline were built when a single-car garage was for one car, not two SUVs and a workbench. Widening an opening often requires header modification, and skipping that step is what causes new panels to bind and photo-eye sensors to sit too low. We’ll look at the framing before we quote, so there’s no surprise behind the drywall.
Pricing for Garage Door Installation in Boulder, CO
Here’s what a garage door installation in Boulder runs, in plain dollars.
| Service | Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Spring Repair | $180-$340 |
| Track Realignment | $120-$240 |
The biggest cost driver in Boulder is wind rating. A standard 16×7 steel double door without reinforcement tends toward the lower end of the range. A wind-rated 16×7 with horizontal struts, heavier gauge track, and high-cycle springs tends toward the upper end. Materials vary: a Clopay steel sectional is typically less expensive than an Amarr composite, but the steel door is the one that holds up to Chinook gusts. We also offer steel and wood custom doors, and every estimate includes the full written scope: panel type, spring spec, track gauge, strut count, weather seal, and haul-away of the old door.
You’ll know the exact price before we start. Clause 1. Call (970) 528-5851 for a free estimate on any installation in Boulder.
We Also Serve Cities Near Boulder
Our Boulder, CO crews regularly install garage doors in Boulder neighborhoods including Table Mesa, Martin Acres, and Shanahan Ridge, and we serve the surrounding communities of Niwot, Louisville, Lafayette, and Erie. If you’re just outside Boulder and need wind-rated installation or a spring replacement after a downslope event, call the same number and ask about Colorado’s Chinook-season wear patterns. We’ll tell you what’s failing and what it costs before we touch anything.
Serving Boulder, CO - Our Local Coverage Area
We’re based in the Boulder area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Boulder
Yes. Boulder sits at the base of the Flatirons, and downslope Chinook wind events routinely produce gusts of 80-140 mph across the city, not just on the western edge. If your garage faces west, north, or sits on an exposed slope, wind-rated panels and reinforcement struts are the minimum we’d recommend. The difference in cost is real, but so is the failure mode: standard panels buckle inward under that load, pulling track out of alignment and damaging the sections themselves. Call (970) 528-5851 and we’ll quote both configurations so you can compare them side by side.
In Boulder, a standard torsion spring lasts roughly 5 to 7 years, and often less on west-facing doors. The 40-50°F temperature swings that come with Chinook events fatigue spring steel faster than the steady cold of higher-elevation mountain towns or the flat warmth of Denver. A high-cycle spring rated for Boulder’s temperature range is the standard replacement we quote. If your door groans or moves more slowly in cold weather, the spring is nearing the end of its life and should be quoted now, not after it snaps.
Look for three things. First, does the door flex visibly when you press a hand against the center of a panel? Flexing means the panel has lost rigidity and will buckle under 100+ mph gusts. Second, is the track straight, with no gaps between the rollers and the rail? Wind pressure finds loose track immediately. Third, does the door lift smoothly by hand? If it doesn’t, the spring is under tensioned or the cables are fraying, and a storm is a bad time to find out. Our Boulder technicians can do a wind-readiness inspection before the forecast front arrives; call (970) 528-5851.
Usually not. Martin Acres and Baseline homes from the 1950s-1980s commonly have garage openings that are 8 feet wide, where today’s standard double door is 16 feet. Widening an opening means modifying the header, because the existing header is sized for the original span. We inspect the framing before we quote, and we’ll tell you plainly whether the job is a header replacement, a custom-width door, or a smaller door that fits the existing opening. Call (970) 528-5851 and we’ll send a technician to measure and photograph the space.
It’s almost always the spring. The torsion spring is what balances the door’s weight. The opener just pushes. When a spring fatigues from Boulder’s temperature swings, the opener must lift the full weight of the door alone, which strips the gear and eventually burns the motor. If your opener labors or screams during travel, the door itself is unbalanced. The repair is to replace the spring first, then check the opener. A new spring runs $180-$340 in Boulder, and it’s far cheaper than replacing an opener that was destroyed by a spring that should have been replaced months earlier. Call (970) 528-5851 for an exact quote, and we’ll explain what we found before we replace anything.
Written by Marcus Deller, Owner at Servo Garage Doors Longmont, serving Boulder since 2015.